Optical metrology on primary mirror of visible emission line coronagraph on board Aditya-L1 mission

Abstract

The visible emission line coronagraph (VELC) on board the Aditya-L1 mission is an internally occulted reflective coronagraph. It is capable of simultaneous observations of the solar corona in imaging, spectroscopic, and spectropolarimetric modes very close to the solar limb, to 1.05 R⊙ (R⊙ – solar radius). Primary mirror (M1) of the VELC receives the light from both the solar disk and the corona up to 3 R⊙. In the VELC, occultation happens at the focus of the M1. Secondary mirror (M2) with a central hole size equal to 1.05 R⊙ is mounted at the focal plane of M1 and serves the purpose of an internal occulter. To meet the proposed science goals of the payload, M1 surface should be super polished with good imaging characteristics. This results in stringent requirements of the surface figure and microroughness on the mirror surface. M1 is an off-axis parabola, so achieving the demanding requirements is quite challenging. At the same time, testing of M1 after development is crucial for evaluating its performance. This paper provides the details of the optical metrology tests carried out on M1 along with the results obtained and their implications on the performance of the VELC. © 2022 Society of Photo-Optical Instrumentation Engineers (SPIE) [DOI: 10.1117/1.JATIS.8.4.044004]